Advantages:
• Approved by MAN B&W Diesel through 4,000 hrs field test on the type 6S90ME-C, for use in the latest generation engine designs with high-pressure and high-temperature.
• High Viscosity Index and stable basestocks can reduced cylinder oil consumption.
• Excellent capability to neutralize acid outgrowths producing in combusting of poor fuels, protecting engine from acid corrosion.
• Excellent anti-wear performance to reduce the friction and wear-off of metallic components and extend the life of engine parts.
• Outstanding detergency and dispersancy to prevent carbon deposit at cylinder ring groove and cylinder liner and ensure the cleanness of engine combustion chamber.
• Exceptional diffusivity performance to drive oil quickly reaching and spreading out over the steel surface to form oil films to reduced liner and ring wear-off.
Recommended Application:
• The best choice cylinder oil for marine low speed, cross-head diesel engines using residual oil with sulfur content between 1.5% and 3.5%.
Typical Properties:
Item
|
Marine Cylinder Oil 5070S
|
SAE Grade
|
50
|
TBN mgKOH/g
|
|
Viscosity@ 100ºC, mm2/s
|
19.68
|
Viscosity Index
|
100
|
Flash Point C.O.C, ºC
|
242
|
Pour Point, ºC
|
-9
|
Health & Safety
• Based on available information, this product is not expected to produce adverse effects on health when used for the intended application, following the recommendations provided in the Material Safety Data Sheet (MSDS). MSDSs are available upon request through your sales contract office.
• This product should not be used for purposes other than its intended use.
• If disposing of used product, take care to protect the environment.